Stereo Vibrato - Korg PA1000 User Manual

636| Effects for the Sounds, Voice, Guitar

Stereo Vibrato

This effect causes the pitch of the input signal to shimmer. Using the
AutoFade allows you to increase or decrease the shimmering speed.
Stereo In - Stereo Out
Left
Right
LFO: Tri / Sine
AutoFade
a Autofade Src
b Fade-In Delay
[msec]
Fade-In Rate
c LFO Waveform
LFO Shape
d LFO Frequency
Mod
e LFO Frequency
[Hz]
Src
Amt
f MIDI Sync
BPM
Base Note
Times
Vibrato
Vibrato
LFO Shape
Fade-In Delay LFO Frequency
Off...Tempo Selects the modulation source that starts
AutoFade
00...2000 Sets the fade-in delay time
1...100 Sets the rate of fade-in
Triangle, Sine Selects the LFO Waveform
–100...+100 Changes the curvature of the LFO Waveform
D-mod, Switches between D-mod and AUTOFADE for
AUTOFADE the LFO frequency modulation
0.02...20.00 Sets the speed of the LFO
Off...Tempo Selects a modulation source for LFO speed
–20.00... Sets the modulation amount of LFO speed
+20.00
Off, On When this is on, the LFO speed is set by BPM,
Base Note, and Times, instead of Frequency
MIDI, MIDI syncs to the system tempo; 40–300 sets
40.00... the tempo manually for this individual effect
300.00
Selects the type of notes that specify the LFO
r w
...
speed
x1...x32 Sets the number of notes that specify the LFO
speed
FX Amt
FX Amt