28: Stereo Auto Pan - Korg TouchView Trinity Effect Manual

28: Stereo Auto Pan

This Auto Pan effect pans sound between left and right. It is stereo, and shifting the left and right LFO
phases from each other will simulate the sound of the left and right channels crossing over each other by
turns, or chasing each other.
Stereo In - Stereo Out
Left
Right
LFO: Tri / Sin
a LFO Waveform
b LFO Shape
c LFO Phase [degree]
LFO Frequency [Hz]
d Src
Amt
Depth
e Src
Amt
Wet/Dry
f Src
Amt
b: LFO Shape
c: LFO Phase
LFO Shape
Triangle, Sine
–100...+100
–180...+180
0.02...20.00Hz
None...Tempo
–20.00...+20.00Hz
0...100
None...Tempo
–100...+100
Dry, 1:99...99:1, Wet
None...Tempo
–100...+100
You can change the panning curve by modifying the LFO waveform.
This parameter determines the difference in the left and right LFO phases. When
you change the value gradually from "0", the sound from the left and right chan-
nels will chase each other around. If you set the parameter to +180 or –180, the
sound from each channel will cross over each other.
You need to input different sounds to each channel in order for this parameter to
be effective.
Pan
Depth
Pan
LFO Phase
Selects LFO Waveform.
Determines how much the LFO waveform is changed.
P.32
LFO phase difference between the left and right
LFO speed
Modulation source of LFO speed
Modulation amount of LFO speed
Depth of LFO modulation
Modulation source of the depth of modulation
Modulation amount of the depth of modulation
Sets the balance between the effect and dry sounds.
Modulation source of effect balance
Modulation amount of effect balance
28: Stereo Auto Pan
Wet / Dry
Wet / Dry
P.85
85