Ultromould - Pharmacia Biotech Multiphor II User Manual

9.8 UltroMould

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
UltroMould provides a simple and reliable method for casting ultrathin
polyacrylamide gels with a size of 125x258 mm. Using the patented sliding
plate technique, gels with a uniform thickness of 0.1, 0.2, 0.3, 0.4 or 0.5 mm
can be prepared. The required gel volumes are 5, 10, 15, 20 and 25 ml,
respectively. Urea or other gel additives may be included in the gel solution.
Unit contents - Code No. 18-1018-16
Designation
Gel Casting Table
Glass Plate long, 6x125x490 mm
Glass Plate short, 6x125x270 mm
Holding Guides 4 pcs
Weight
Gel Spacer Set (5 units/pkg)
Optional accessories
Designation
Roller
GelBond PAGfilm, 124x258 mm (50/pkg)
Repel-Silane 500 ml
Pour about 2 ml of Repel-Silane onto one side of the clean short glass plate
and distribute it evenly over the surface with a tissue. Leave it to dry for a
few minutes. Rinse the glass plate with distilled water and remove water
droplets by shaking or wiping lightly with a tissue. Leave the plate to air dry.
The coating of Repel-Silane will stop the polyacrylamide gel from adhering
to the surface of the glass plate.
9. Multiphor II application kits and accessories
Code No.
80-1115-78
80-1115-80
80-1115-81
80-1318-35
80-1115-88
56-1154-98
Code No.
80-1106-79
80-1129-36
17-1331-01
79