Multiphor Ii Application Kits And Accessories; Sds And Native Page, Ief Kit - Pharmacia Biotech Multiphor II User Manual

9.1 SDS and
Native
PAGE, IEF Kit
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
9. Multiphor II application
kits and accessories
This section describes the contents of the Multiphor II application kits and
accessories and provides instructions for assembly and use.
For experimental details including preparation of samples and stock
solutions, running conditions, staining and preserving procedures see
Chapter 4. Operation. Further information can be found in "Electrophoresis
in Practice" - Code No. 18-1104-12 and "Acrylamide Gel Casting
Handbook" - Code No. 18-1102-95.
This kit is used for casting 0.5 mm homogeneous or gradient polyacrylamide
gels. The gels are cast on a 1 mm thick glass plate (125x260 mm).
Alternatively, casting can be done on GelBond PAGfilm (124x258 mm).
Optional glass plates with U-frames allow casting of 1.0 and 2.0 mm thick
gels.
The kit includes sample application pieces and strips for applying the sample
onto the gel surface. An optional template and tape allow preparation of a
slot-former.
Kit contents - Code No. 18-1102-45
Designation
Glass Plate, 125x260, 0.5 mm U-frame (2/pkg)
Glass Plate, 125x260x1 mm (15/pkg)
Glass Plate, 125x260x3 mm (2/pkg)
FlexiClamp (6/pkg)
IEF Electrode Strip (100/pkg)
Electrophoresis Wick 104x253 mm (500/pkg)
IEF Sample Application. Pieces (200/pkg)
IEF/SDS Sample Application. Strip, 52 samples 5-20 µl
(5/pkg)
Cellophane Sheets (50/pkg)

9. Multiphor II application kits and accessories

Code No.
80-1106-89
80-1106-29
80-1106-99
18-1013-73
18-1004-40
80-1129-52
80-1129-46
18-1002-26
80-1129-38
61