Pharmacia Biotech Multiphor II User Manual page 77

9. Multiphor II application kits and accessories
70
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Gel Knife
Blade (5/pkg)
Tape, Dymo 0,25x9 mm, 3 m
Electrophoresis Wick, 82x130 mm (500/pkg)
Tygon Tubing, 2.4/4.0 mm, 2 m
Adaptor Connector
Optional accessories
Designation
Roller
GelBond film 84x94 mm (50/pkg)
Sample Application Syringe, 15 µl
Voltage Probe
Anti-condensation Lid
Humidity Chamber (4/pkg)
Staining Tray 1, 60x150x300 mm
Clean the glass plates. Pre-coat the glass plates with agarose so that the gels
adhere during staining and destaining. Apply a thin layer of hot agarose
solution (0.l-0.3%) onto each warmed glass plate, distribute it evenly and
leave the plate to dry. Lay the prepared glass plate on a levelled table.
Prepare the agarose-buffer gel solution and divide it into 8 or l2 ml aliquots.
With one movement, pour each aliquot of molten gel solution onto the
center of the gel support. If necessary, use the tip of a pipette or the lip of
the test tube to ensure that the gel solution is distributed evenly over the
entire gel support. Surface tension should stop the gel solution from
overflowing.
80-1106-37
80-1106-38
80-1129-50
80-1129-53
80-1006-70
80-1011-88
Code No.
80-1106-79
80-1129-33
80-1106-48
18-1018-15
80-1106-46
18-1016-78
18-1018-08