Pharmacia Biotech Multiphor II User Manual page 14

The ceramic (aluminium oxide) cooling plate measures 210x270
mm, supports the gel, and provides uniform temperature control.
Aluminium oxide is an excellent heat conductor and electrical
insulating material.
WARNING! The cooling plate is rated for operation at up to 3.5
kV (p-p).
To facilitate the correct positioning of electrophoresis gels, the
surface of the cooling plate is screened with a template measuring
190x250 mm.
The two grommets are connected to the inlet and outlet tubes of
the cooling plate which can then be connected to a thermostatic
ciculator such as MultiTemp III.
WARNING! Only use water with high electrical resistance as
coolant and NEVER EXCEED maximum pressure of 0.5 bar.
The cooling tubing, tubing connector set and hose clamps provide a
flexible and safe way to connect Multiphor II to a thermostatic
circulator such as MultiTemp III.
The electrode holder holds the movable EPH/IEF electrodes. The
holder keeps the electrodes away from the gel surface during
alignment and then provides a uniform pressure over the buffer
strips or electrode strips during the separation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3. Description of parts
11