B.5
Diagnostics data of SM 331; AI 6 x TC isolated
Introduction
The section below describes the structure and content of the various bytes in diagnostics
data. General rule: A fault is indicated by a logic "1" at the relevant bit.
Byte 0 to byte 3 (diagnostic data records 0 and 1)
Figure B-9
S7-300 Module data
Manual, 06/2017, A5E00105505-AJ
Diagnostic data records 0 and 1
Diagnostics data of signal modules
B.5 Diagnostics data of SM 331; AI 6 x TC isolated
593