Siemens SIMATIC S7-200 Series Manual
Ethernet gateway for simatic mpi/ profibus driver
Hide thumbs
Also See for SIMATIC S7-200 Series:
- System manual (607 pages) ,
- Getting started (65 pages) ,
- Manual (55 pages)
Advertisement
Ethernet Gateway
for SIMATIC MPI/
PROFIBUS Driver
1
System Configuration....................................................................................................... 3
2
External Device Selection ................................................................................................ 6
3
Communication Settings .................................................................................................. 7
4
Setup Items ...................................................................................................................... 9
5
Supported Device Addresses......................................................................................... 15
6
Device Code and Address Code.................................................................................... 17
7
Error Messages.............................................................................................................. 18
1
Siemens AG
Advertisement
Related Manuals for Siemens SIMATIC S7-200 Series
Summary of Contents for Siemens SIMATIC S7-200 Series
-
Page 1: Table Of Contents
Siemens AG Ethernet Gateway for SIMATIC MPI/ PROFIBUS Driver System Configuration....................... 3 External Device Selection ....................6 Communication Settings ....................7 Setup Items ........................9 Supported Device Addresses..................15 Device Code and Address Code..................17 Error Messages......................18... - Page 2 Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver Introduction This manual describes how to connect the Display and the External Device (target PLC). In this manual, the connection procedure is described in the sections identified below: System Configuration "1 System Configuration" (page 3) This section lists the types of External Devices and SIO that you can connect.
-
Page 3: System Configuration
Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver System Configuration The system configuration in the case when the External Device of Siemens AG and the Display are connected is shown. Communication Series Link I/F Setting Example Method CPU214 CPU215 CPU216 SIMATIC "Setting Example 1"... - Page 4 Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver Connection Configuration 1:1 Connection External Device Display Adapter 1:n Connection Maximum number of External Devices: 12 External Device External Device Display Adapter Maximum number of External Devices: 12 External Device External Device Display Adapter GP-Pro EX Device/PLC Connection Manual...
- Page 5 Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver n:m Connection Maximum Display Units depends on the External Device CPU Maximum number of Display: 12 External Device External Device Display Display Adapter Adapter • It is able to connect only one adapter to one Display. Maximum number of Display: 7 Maximum number of Display: 12 External Device...
-
Page 6: External Device Selection
Use an integer from 1 to 4 to enter the number of Devices/PLCs to connect to the Number of Devices/PLCs display. Select the manufacturer of the External Device to be connected. Select "Siemens Manufacturer AG". Select a model (series) of the External Device to be connected and connection method. -
Page 7: Communication Settings
Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver Communication Settings This section provides examples of communication settings recommended by Pro-face for the Display and the External Device. Setting Example 1 GP-Pro EX Settings Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC]. GP-Pro EX Device/PLC Connection Manual... - Page 8 Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC] window, select the external device and click [Settings] To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add Device] to add another External Device.
-
Page 9: Setup Items
Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver Setup Items Set up the Display's communication settings in GP Pro-EX or in the Display's off-line mode. The setting of each parameter must match that of the External Device. "3 Communication Settings" (page 7) GP-Pro EX Setup Items ... - Page 10 Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver Setup Items Setup Description Input the IP address of Gateway/Module. Search the adapter in the network and click the [Search]. IP Address Port No. Display the port number of Gateway/Module. Speed Set the communication speed of MPI/PROFIBUS network. Local Node Set the node number of Display in MPI/PROFIBUS network.
- Page 11 Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC] window, select the external device and click [Settings] To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add Device] to add another External Device.
- Page 12 Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver Setup Items in Offline Mode • Refer to the Maintenance/Troubleshooting manual for information on how to enter offline mode or about the operation. Maintenance/Troubleshooting Manual "Offline Mode" Communication Settings To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings] in off-line mode. Touch the External Device you want to set from the list that appears.
- Page 13 Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver (Page 2/2) Setup Items Setup Description IP Address Input the IP address of Gateway/Module. Port No. Display the port number of Gateway/Module. Speed Set the communication speed of MPI/PROFIBUS network. Local Node Set the node number of Display in MPI/PROFIBUS network. Highest Node Number Set the maximum node number of MPI/PROFIBUS network.
- Page 14 Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver Device Setting To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings]. Touch the External Device you want to set from the displayed list, and touch [Device]. Setup Items Setup Description Select the External Device to set.
-
Page 15: Supported Device Addresses
Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver Supported Device Addresses The following table shows the range of supported device addresses. Please note that the actual supported range of the devices varies depending on the External Device to be used. Please check the actual range in the manual of your External Device. - Page 16 Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver S7-300/400 Series : This address can be specified as system data area. Bit Address Word Address Device Remarks bits English German English German DB00001.DBX00000.0 - DB00001.DBW00000 - Data Block DB65535.DBX65533.7 DB65535.DBW65532 I00000.0 - E00000.0 - IW00000 - EW00000 - Input...
-
Page 17: Device Code And Address Code
Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver Device Code and Address Code Use device code and address code when you set "Device Type & Address" for the address type of the data display or other devices. S7-200 Series Device Name Device Code Device Address Code (HEX) -
Page 18: Error Messages
Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver Error Messages Error messages are displayed on the screen of Display as follows: "No. : Device Name: Error Message (Error Occurrence Area)". Each description is shown below. Item Description Error No. Name of External Device where error occurs. Device name is a title of External Device set Device Name with GP-Pro EX.((Initial value [PLC1]) Error Message...