Programmable Parameters - Siemens SIMATIC Manual

Analog modules
6.11 Analog input module SM 331, AI 6 x TC isolated (6ES7331-7PE10-0AB0)
6.11.2

Programmable parameters

Adjustable parameters
For general information on programming analog modules, refer to the section titled
Programming analog modules (Page 294).
Parameters
Diagnostics
•
Group diagnostics
•
With wirebreak monitoring
Enable
•
Diagnostic interrupt
•
Hardware interrupt when limit
exceeded
•
Auto-calibration
•
Temperature unit
•
Interference frequency sup-
pression
Measurement
•
Measurement type
•
Measuring range
•
Response to open thermocou-
ple
•
Smoothing
•
External reference junction
424
Range of values
Yes/no
Yes/no
Yes/no
Yes/no
Yes/no
Degrees Celsius; degrees Fahren-
heit; Kelvin
400 Hz; 60 Hz; 50 Hz; 10 Hz
disabled
TC-IL thermocouple
(linear, internal comparison)
TC-EL thermocouple
(linear, external comparison)
TC-L00C thermocouple
(linear, 0 °C reference temperature)
TC-L50C thermocouple
(linear, 50 °C reference tempera-
ture)
See chapter Measurement types and
measuring ranges (Page 423)
Overflow; underflow
None
Low
Average
High
Local thermoresistor
Default Type of pa-
rameter
No Static
No
No
No Dynamic
Yes
degrees Cel- Dynamic
sius
50 Hz Dynamic
TC-IL:
Dynamic
Type K
Overflow Dynamic
None Dynamic
Local ther- Dynamic
moresistor
Manual, 06/2017, A5E00105505-AJ
Scope
Channel
Module
Module
Module
Channel
Channel
Channel
Channel
S7-300 Module data