Siemens SIMATIC Manual page 454

Analog modules
6.13 Analog output module SM 332; AO 4 x 16 bit; isochrone; (6ES7332-7ND02-0AB0)
Technical specifications
Basic execution time of the module (independent of the number of
enabled channels)
•
in standard mode
•
in isochronous mode
Transient recovery time
•
with resistive load
•
with capacitive load
•
with inductive load
Interference suppression, error limits
Crosstalk between outputs
Operational limit (across entire temperature range, relative to measurement range end value in the selected output range)
•
Voltage output
•
Current output
Basic error limit (operational limit at 25 °C, relative to the measurement range end value in the selected output range)
•
Voltage output
± 10 V
0 V to 10 V
1 V to 5 V
•
Current output
± 20 mA
0 mA to 20 mA
4 mA to 20 mA
Temperature error (relative to output range)
•
Voltage output
•
Current output
Linearity error (relative to output range)
Repeat accuracy (in transient state at 25°, relative to output range)
Output ripple; range 0 Hz to 50 kHz (relative to output range)
Status, interrupts, diagnostics
Interrupts
•
Diagnostic interrupt
Diagnostic functions
•
Group error display
•
Reading diagnostic information
Set substitute values
454
<800 μs
750 µs
0.2 ms
3.3 ms
0.5 ms (1 mH) / 3.3 ms (10 mH)
> 100 dB
±0.12%
±0.18%
±0.02%
±0.02%
±0.04%
±0.02%
±0.02%
±0.04%
± 0.0025%/K
± 0.004%/K
±0.004%
±0.002 %
±0.05 %
programmable
programmable
red LED (SF)
supported
yes, programmable
Manual, 06/2017, A5E00105505-AJ
S7-300 Module data