Siemens SIMATIC Manual page 4

Preface
Name of the manual
Programming manual
Migration from PROFIBUS DP to PROFINET IO
Entry ID: 19289930
Manual
•
•
YOU ARE CURRENTLY READING the Manual
S7-300 Automation System: Module Data
Entry ID: 8859629
Instructions List
•
•
Getting Started
Available anthology of Getting Started manuals:
•
•
4
CPU 31xC: Technological functions
Entry ID: 12429336
CD containing examples
CPU 31xC, CPU 31x,
IM151-7 CPU, IM154-8 CPU, BM 147-1 CPU,
BM147-2 CPU
Entry ID: 13206730
CPU 312, CPU 314, CPU 315-2 DP
CPU 315-2 PN/DP, CPU 317-2 PN/DP,
CPU 319-3 PN/DP as of V3.0
Entry ID: 31977679
S7-300 Getting Started
Entry ID: 15390497
PROFINET Getting Started Collection
Entry ID: 19290251
Description
Guideline for migration from PROFIBUS DP to
PROFINET IO.
Description of the technological functions: posi-
tioning, counting, point-to-point coupling, loop
control.
The CD contains examples of the technological
functions.
Description of the functions and technical data of
signal/ power supply/ interface modules.
List of the CPU's instruction set and correspond-
ing execution times. List of executable blocks
(OBs, SFCs, SFBs) and their execution times.
Using concrete examples, the Getting Started
documentation provides step-by-step instructions
focused on commissioning a fully functional ap-
plication.
Manual, 06/2017, A5E00105505-AJ
S7-300 Module data