Diagnostics Via Data Sets - Siemens SIRIUS 3RW5 PROFIBUS Equipment Manual

Messages and diagnostics

7.4 Diagnostics via data sets

7.4 Diagnostics via data sets
Data set 92: Soft starter diagnostics (slot 2)
The soft starter diagnostics describes the current condition of the 3RW5 soft starter.
Depending on the 3RW5 soft starter, you can read out and evaluate the
Soft Starter Diagnosis via data set 92 of the 3RW5 soft starter (slot 2) (Page 135).
Data set 92: HMI diagnostics (slot 3)
The HMI diagnostics describes the current status of the 3RW5 HMI High Feature.
Depending on the 3RW5 soft starter, you can read out and evaluate the HMI diagnostics via
data set 92 of the 3RW5 HMI High Feature (slot 3) (Page 164).
Data set 94: Measured values
The current measured values of the 3RW5 soft starter are acquired in this data set.
Depending on the 3RW5 soft starter, you can read out and evaluate the measured values via
data set 94 (Page 140).
Data set 95: Statistic data
The statistic data group together the operating states from the past that are relevant to the
load.
Depending on the 3RW5 soft starter, you can read out and evaluate the statistic data via
data set 95 (Page 141).
Data set 96: Maximum pointer
The maximum pointers are stored extreme values of measured values from the past.
Depending on the 3RW5 soft starter, you can read out and evaluate the maximum pointers
data via data set 96 (Page 143).
Via a connection on the 3RW5 communication module, you can reset the maximum pointers
in the following ways:
● SIRIUS Soft Starter ES (TIA Portal) Premium / Professional
Brief overview: Window "Project Navigation" with current project under created
Soft Starter > "Commissioning" > Window "Work area" > "Soft Starter >
Maximum pointer"
Further information on the operation of SIRIUS Soft Starter ES (TIA Portal) can be found
in the online help of SIRIUS Soft Starter ES (TIA Portal).
● "Reset maximum pointer" command via data set 93 (Page 127)
96
SIRIUS 3RW5 PROFIBUS communication module
Equipment Manual, 02/2020, A5E35633549002A/RS-AC/003