Siemens SIMATIC Manual page 283

Changing the positioning of measuring range modules
To insert the measuring range module into a different slot:
1. Remove the measuring range module from the slot of the analog input module by lifting it
out with a screwdriver.
Figure 5-1
2. Insert the measuring range module into the required slot (1) of the analog input module.
The indicator of the selected measuring range must be in line with the marker on the
module (2).
Figure 5-2
S7-300 Module data
Manual, 06/2017, A5E00105505-AJ
5.3 Setting the measuring method and ranges of analog input channels
Removing the measuring range module from a slot of the analog input module
Inserting the measuring range module into the analog input module
Principles of analog modules
283