Kenwood NX-5000 Series Function Reference page 99

1 DMR CONVENTIONAL SYSTEM
1.19 Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming)
Site Roaming Behaviors
When System-Personality or the Zone-channel of the system that is configured as "DMR Site Roaming" is selected, Site
Roaming starts automatically. "Site Roaming" is displayed when the "
enabled. For portable transceivers, the LED light flashes according to the configuration of Site Roaming LED.
0
The behavior if "Personality" is configured in Zone-channel Format
When the channel selected is assigned with Personality of the system configured as "DMR Site Roaming", Site Roaming
starts for the Personalities of the same system. In this case, the Personality name is displayed.
Transmission by a transceiver will be in accordance with the Slot Selection and Color Code configurations of Personality
to be used as the Revert Channel. As scan is performed on Personality, one Personality is backed up as a Revert Channel
for each system.
The Personality the transceiver received last time is retained even if the transceiver is turned OFF. When the transceiver
is turned ON and transmits next time, the Personality is used as the Revert Channel. If no Revert Channel exists, the
Personality configured for the selected Zone-channel is used as the Revert Channel. While the transceiver is receiving,
or if the transceiver transmits while the Dropout Delay Time or Dwell Time is counting down, the transceiver transmits
using the Revert Channel.
0
The behavior if "Channel Table" is configured in Zone-channel Format
When the zone of a system that is configured as "DMR Site Roaming" is selected, Site Roaming starts for channels that
are configured within the zone.
Transmission by a transceiver will be in accordance with the Slot Selection and Color Code configurations of the Revert
Channel.
The channel the transceiver received last time is retained even if the transceiver is turned OFF. When the transceiver is
turned ON and transmits next time, the channel will be used as the Revert Channel. If there is no Revert Channel, the
channel of the lowest number configured for the zone will be used as the Revert Channel. While the transceiver is
receiving, or if the transceiver transmits while the length of time configured for Dropout Delay Time or Dwell Time is
elapsing, the transceiver transmits using the Revert Channel.
DMR FUNC (K, F)/Ver 2.20
" icon lights up and "Site Roaming" Displayed is
A
12 : 34
M
Zone 1
Channel 1
S i t e R o a m i n g
Me nu Z on e+
CONTENTS INDEX
82