Kenwood NX-5000 Series Function Reference page 136

3 COMMUNICATION SECURITY
3.1 Toggling the Encryption during Transmission between Enabled and Disabled
0
Configuring Encryption during transmission to be disabled
1
Press the Scrambler/ Encryption
0
For the bit scramble encryption type
The " " icon disappears and Encryption will be disabled.
0
AES/ DES or DES (Built-in DES) format
The " " icon or "
0
Enhanced Encryption format
The " " icon disappears and Encryption will be disabled.
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the transceiver (
3.2 Configuring the Encryption Key Data Used for
Communications
An Encryption Key used for communications can be selected from Multi-key List and configured.
When the transceiver is using the bit scrambling, AES/ DES or Enhanced Encryption format, it can store up to 32 Encryption
Keys (Key ID, Key Data). When the transceiver is using the DES (Built-in DES) format, it can store up to 4 Encryption Keys
(Key ID, Key Data). However, only 1 of the Encryption Keys can be used for transmission.
The Encryption Key to be used for transmission can be configured for each channel by making a selection from the Multi-
Key List using the KPG-D1/ D1N. (Refer to
The transceiver needs to enter Scrambler/ Encryption Code Mode in order to change an Encryption Key. In Scrambler/
Encryption Code Mode, a Multi-key corresponding to the Encryption Key data used for transmission can be selected from
the Multi-Key List configured for the transceiver.
Pressing the Scrambler/Encryption Code key causes the transceiver to enter Encryption Code Mode.
Or, the transceiver can also enter Scrambler/Encryption Code Mode by pressing the Menu key to place the transceiver in
Menu Mode and then selecting "Scrambler/Encryption Code". (Refer to Common FUNC
DMR FUNC (K, F)/Ver 2.20
key while Encryption is enabled.
" icon disappears and Encryption is disabled.
Multi-key List.)
Transceiver Settings > Key Assignment)
Using Menu
CONTENTS
Mode.)
119
INDEX