Kenwood NX-5000 Series Function Reference page 71

1 DMR CONVENTIONAL SYSTEM
1.11 Sending and Receiving a Short Message (Short Data Call)
Receiving a Short Message
Upon receiving a Short Message, the received Status Message appears on the display, and the transceiver can send the
Short Message to an external device from the communication ports.
Note
To use serial communications, a user needs to prepare DMR compatible software or external devices.
0
A received Short Message can be left as a record. The record can be checked in Stack Mode. (Refer to Common FUNC
0
Viewing the Receive History
Transceiver behavior
1
The transceiver starts receiving a Short Message.
"Receive Data" appears.
2
The transceiver receives a Short Message.
The " " icon blinks and "Complete" appears.
The initial portion (three lines) of the ID Name and Short Message of the
transmitting transceiver appears for three seconds. Then, the display is
scrolled line by line every two seconds until the last line is shown. After the
last line is shown, the display scroll is repeated from the first line.
Note
If the transceiver receives a Short Message by a Group Call, the ID Name appears according to the configuration for Unit
0
ID Display on Group Call. (Refer to
Call).)
If Alert Tone (Status/Short Message Call) is configured to sound when receiving, an Alert Tone will sound. Pressing
0
any key on the transceiver stops the Alert Tone.
Configuration using KPG-D1/ D1N
Configuring Alert Tone (Status/Short Message Call) (
Conventional)
DMR FUNC (K, F)/Ver 2.20
(Stack).)
Display When the Transceiver Receives a Group Call (Unit ID Display on Group
Transceiver Settings > DMR > DMR Information >
CONTENTS
A
12 : 34
M
Z o n e 1
C h a n n e l 1
R e c e i v e D a t a
M en u Zo ne+
A
12 : 34
M
Z o n e 1
C h a n n e l 1
C o m p l e t e
M en u Zo ne+
A
12 : 34
M
Atlanta Office
Please pick up
customers at the
airport terminal
Zon e+
54
INDEX