Kenwood NX-5000 Series Function Reference page 118

2 COMMUNICATIONS IN AN EMERGENCY
2.4 Automatically Transmitting and Receiving in Emergency Mode
Transmit Duration
Transmit Duration is the duration of a single automatic transmission cycle in Emergency Mode.
The transceiver switches to automatic reception for emergency when the time configured in Transmit Duration elapses after
the transceiver starts automatic transmission for emergency.
The transceiver behaves as follows when "0" is configured in Transmit Duration:
0
If "None" is configured for Emergency ID:
The transceiver does not send anything during automatic transmission.
0
If anything other than "None" is configured for Emergency ID:
The transceiver sends only an Emergency Status during automatic transmission.
Configuration using KPG-D1/ D1N
Configuring Transmit Duration (
Receive Duration
Receive Duration is the duration for a single session of automatic reception for emergency in Emergency Mode.
The transceiver switches to automatic transmission for emergency when the time configured in Receive Duration elapses
after the transceiver starts automatic reception for emergency.
Configuration using KPG-D1/ D1N
Configuring Receive Duration (
Emergency Microphone Sense
Emergency Microphone Sense is the function used to adjust the microphone input sensitivity in Emergency Mode.
In Emergency Microphone Sense, the microphone sensitivity can be configured within the following range:
6 dB, 4 dB, 2 dB, 0 dB, -2 dB, -4 dB, -6 dB, -8 dB, -10 dB, -12 dB, -14 dB, -16 dB, -18 dB, -20 dB
The appropriate level of microphone sensitivity for normal operation is 0 dB. Based on this level, the parameter of the
microphone sensitivity can be configured.
Note
The microphone sensitivity of the headset connected via Bluetooth also functions according to the configuration in
Emergency Microphone Sense while the transceiver is in Emergency Mode.
Configuration using KPG-D1/ D1N
Configuring Emergency Microphone Sense (
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > Emergency Information > Emergency Profile)
Transceiver Settings > Emergency Information > Emergency Profile)
Transceiver Settings > Emergency > Emergency Information)
CONTENTS INDEX
101