Kenwood NX-5000 Series Function Reference page 155

4 SCAN
4.3 Scan by Registering Multiple Target Channels for Scan in the List (List Scan)
Configuration using KPG-D1/ D1N
0
Assigning functions to the PF keys on the transceiver (
0
Configuring Scan List (
0
Configuring Scan List Number (Zone) (
Conventional)
0
Configuring Scan List Number (Channel) (
Conventional > General)
0
Configuring Scan Type (
0
Configuring "Scan" Displayed to be enabled or disabled (
General)
Conditions to Activate the Scan (List Scan)
For the transceiver to start the List Scan, 2 or more Zone-channels must be registered as members in a Scan List.
Note
A Priority Channel is always registered as a member in a Scan List. However, if "Selected" is configured for the type of
0
the Priority Channel (Type), the selected channel becomes the Priority Channel and target channel for scan, regardless
of the configuration in Selected Channel Scan or whether the selected channel is registered as a member in a Scan
List. (Refer to Priority Channel Type
If Selected Channel Scan is enabled, the scan can be initiated even if only a single Zone-channel is configured as a
0
member in a Scan List because the selected channel also becomes the target channel for scan.
Conditions to Resume the Scan (List Scan)
For the transceiver to resume the List Scan, 2 or more Zone-channels to be scanned must be registered as members in a
Scan List.
If the transceiver does not satisfy the conditions to resume the scan, the scan remains paused.
Note
If a channel is temporarily excluded from the target channels for scanning by the Priority Temporary Delete/Add function,
0
the channel is not scanned even if the channel is registered as a member in Scan List.
If Selected Channel Scan is enabled, the scan can be resumed even if only a single Zone-channel is configured as a
0
member in a Scan List because the selected channel also becomes the target channel for scan.
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > Scan > Scan List)
Transceiver Settings > Zone/Channel > Zone/Channel Information >
Transceiver Settings > Zone/Channel > Channel Edit > DMR
Transceiver Settings > Zone/Channel > Zone Edit > Scan)
(Type).)
Transceiver Settings > Key Assignment)
Transceiver Settings > Scan > Scan Information >
CONTENTS
138
INDEX