Kenwood NX-5000 Series Function Reference page 113

2 COMMUNICATIONS IN AN EMERGENCY
2.1 Placing the Transceiver in Emergency Mode
About the configuration of Emergency Alarm
For the transceiver to send an Emergency Alarm, the configurations by using KPG-D1/ D1N need to be as follows:
Emergency Alarm (DMR): Enabled
Emergency ID (DMR Conventional): DMR
Emergency DMR ID Type: Group ID
For the receiving transceiver to return an acknowledgment when an Emergency Alarm is received, Emergency Alarm
Ack needs to be enabled.
Emergency Alarm Response
Emergency Alarm Response is the function to enable the transceiver to notify a user of the receipt of an Emergency Alarm
when the transceiver receives the Emergency Alarm.
The transceiver behaves as follows according to the configuration using KPG-D1/ D1N.
Configuration
If an Emergency Alarm is received, the Group ID appears on the display. Also, the Emergency
LCD
message and the Unit ID of the transmitting transceiver alternately appear.
The Alert Tone configured for Alert Tone (Emergency Response) sounds from the transceiver
Alert Tone
when receiving an Emergency Alarm.
Horn (Mobile Only) The Horn Alert port becomes active when receiving an Emergency Alarm.
Configuration using KPG-D1/ D1N
0
Configuring Emergency Alarm (DMR) to be enabled or disabled (
Features > DMR Conventional > Emergency)
0
Configuring Maximum ACK Wait Time (
Conventional > DMR > Parameter)
0
Configuring Emergency Alarm Response (
Emergency Alarm Response)
0
Configuring Emergency Alarm Ack (Personality) (
Conventional > DMR)
0
Configuring Emergency Alarm Ack (Channel Edit) (
Conventional > DMR)
DMR FUNC (K, F)/Ver 2.20
Table 2-1 Emergency Alarm Response
Description
Transceiver Settings > Personal > Personal Features > DMR
Transceiver Settings > DMR > DMR Information > General >
Transceiver Settings > Personal > Personality > DMR
Transceiver Settings > Zone/Channel > Channel Edit > DMR
Transceiver Settings > Personal > Personal
CONTENTS INDEX
96