Download Print this page

Kenwood NX-5000 Series Function Reference page 135

Dmr func
Hide thumbs Also See for NX-5000 Series:

Advertisement

3 COMMUNICATION SECURITY
3.1 Toggling the Encryption during Transmission between Enabled and Disabled
3.1
Toggling the Encryption during Transmission between
Enabled and Disabled
Pressing the Scrambler/ Encryption key toggles the status of Encryption during transmission between enabled and
disabled.
Or, Encryption during transmission can be toggled between enabled and disabled by pressing the Menu key to enter Menu
Mode, and then selecting "Scrambler/Encryption". (Refer to Common FUNC
If Encryption is enabled, the transceiver encrypts and sends out audio data or user data such as Short Message. If Encryption
is disabled, the transceiver transmits communication data without encryption.
The receiving behavior of the transceiver differs depending on the Encryption status, either to be enabled or disabled, and
the configuration for Encryption Type. Refer to
for details.
Note
The Encryption status (to be enabled or disabled) can be configured for each channel, so the configured Encryption status
0
applies only for the selected channel.
If the status of Scrambler/Encryption (to be enabled or disabled) is switched for the channel where "Mixed" is configured
0
in Channel Type, the status of Scrambler/Encryption (to be enabled or disabled) applies for a channel according to the
mode (either Analog or DMR) configured in Transmit Mode of the channel.
Operating the transceiver
0
Configuring Encryption during transmission to be enabled
1
Press the
Scrambler/ Encryption
0
For the bit scramble encryption type
The "
" icon appears and then Encryption will be enabled.
0
AES/ DES or DES (Built-in DES) format
The "
" icon or "
Note
The "
" icon appears if the encryption type is AES, and the "
appears if the encryption type is DES.
0
Enhanced Encryption format
The "
" icon appears and then Encryption will be enabled.
Pressing the PTT switch encrypts and sends the audio data.
DMR FUNC (K, F)/Ver 2.20
"Transceiver Behavior upon Receipt of Encrypted Communication
key while Encryption is disabled.
" icon appears and Encryption is enabled.
Using Menu
Mode.)
Z o n e 1
C h a n n e l 1
M en u
Z o n e 1
C h a n n e l 1
" icon
M en u
Z o n e 1
C h a n n e l 1
Menu
CONTENTS
INDEX
Data"
A
12 : 34
M
Zo ne+
A
12 : 34
M
Zo ne+
12 : 34
A
M
Zone+
118

Advertisement

loading

This manual is also suitable for:

Nx-5200Nx-5300Nx-5400Nx-5700Nx-5800Nx-5900