Kenwood NX-5000 Series Function Reference page 12

About the Programming Software
About System Type
For KPG-D1/ D1N, "DMR Conventional" must be selected in System Type of System Information of KPG-D1/ D1N in
order to configure the system data or Zone-channel data of a DMR Conventional system.
In this manual, for the description of each function written as "Configuration using KPG-D1/ D1N", a corresponding reference
in the help texts of KPG-D1/ D1N is described as follows:
Configuring Unit ID (Own) (
(Own))
In this case, if "DMR Conventional" is selected in System Type of System Information, Unit ID (Own) in a DMR
Conventional system can be configured.
Refer to the help texts of KPG-D1/ D1N for the method of System Type configuration using KPG-D1/ D1N.
About Multi RF Deck/ Multi Control Head
For Mobile, by connecting 1 or 2 Control Heads to multiple mobile transceivers (RF Deck), 1 Multi RF Deck system can be
structured.
Refer to Common FUNC "Multi RF Deck/ Multi Control
Multi RF Deck/ Multi Control Head, and for the special functions of Multi RF Deck/ Multi Control Head.
About Options to Use the Functions Described in This
Document
To use the functions described in this document, the following KENWOOD optional accessories need to be prepared on
your own as necessary.
Portable/ Mobile
Portable
Mobile
E type only
*1
Supported models NX-5700/ NX-5800
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > Personal > System Information > DMR Conventional > ID
Head" for the instructions on how to structure and how to configure
KMC-41D (Speaker Microphone)
0
KMC-42WD (Speaker Microphone)
0
KMC-47GPSD (GPS Speaker Microphone)
0
KMC-54WD (Speaker Microphone)
0
KPG-36U/ KPG-36X (Programming Interface Cable)
0
KMC-27A (Microphone)
0
KMC-27B (Microphone)
0
KMC-28A (Microphone with 12-Keypad)
0
KMC-35 (Microphone)
0
KMC-36 (Microphone with 12-Keypad)
0
KMC-9C (Desktop Microphone)
0
KMC-53 (Desktop Microphone)
0
KES-3 (External Speaker)
0
KES-5 (External Speaker)
0
KCT-18 (Ignition Sense Cable)
0
KCT-46 (Ignition Sense Cable)
0
KRA-40 (GPS Antenna)
0
KPG-46U/ KPG-46X (Programming Interface Cable)
0
Option
*1
CONTENTS
xi
INDEX