Kenwood NX-5000 Series Function Reference page 91

1 DMR CONVENTIONAL SYSTEM
1.17 Receiving GPS Data
Configuration using KPG-D1/ D1N
Configuring Map Header (
Settings)
GPS Position Display
GPS Position Display is the function to display the current location information of the own transceiver on the LCD.
Refer to Common FUNC "USING THE GPS
1.18 Remote Operation by Radio Communication (Remote Control)
Remote Control is the function to remotely operate using radio communication the control of an individually specified
transceiver.
An individually specified transceiver can be controlled by sending various Remote Control messages and by making the
transceiver receive the messages.
Remote Control has the following functions:
Function
This is the function to disable the use of an individually specified transceiver (Stun state) by making
the transceiver receive a Remote Stun message. If the transceiver receives the Remote Revive
Remote Stun
message, the Stun state will be reset. (Refer to
Control (Stun/
This is the function to inhibit the use of an individually specified transceiver and disable all
Remote Kill operations by making the transceiver receive a Remote Kill message. (Refer to
Transceiver Capability by Remote Control (Stun/
This is the function to make an individually specified transceiver transmit continuously by making
Remote Monitor the transceiver receive a Remote Monitor message. (Refer to
Another Transceiver by Remote Control (Remote
This is the function to check whether or not an individually specified transceiver is being operated
Radio Check by making the transceiver receive a Radio Check message. (Refer to
Transceiver Is in Operation (Radio
An individually specified transceiver can be controlled by sending various Remote Control messages in Remote Control
Mode and by making the transceiver receive the messages.
Pressing the Remote Control key places the transceiver in Remote Control Mode. Or, pressing the Menu key to enter
Menu Mode and then selecting "Remote Control" places the transceiver in Remote Control Mode. (Refer to Common FUNC
Using Menu Mode.)
Also, various Remote Control messages can be sent by sending a transmission command of the various Remote Control
messages from a PC to the transceiver. In this case, "Data" or "Data + GPS Data Output" needs to be assigned to the
communication port of the transceiver.
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the transceiver (
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > Optional Features > Optional Features 2 > GPS > Base Station
FUNCTION" for details about GPS Position Display.
Table 1-21 Remote Control Functions
Kill).)
Check).)
Description
Disabling the Transceiver Capability by Remote
Kill).)
Monitoring the Situation Around
Monitor).)
Transceiver Settings > Key Assignment)
CONTENTS
Disabling the
Checking Whether Another
74
INDEX