Kenwood NX-5000 Series Function Reference page 87

1 DMR CONVENTIONAL SYSTEM
1.16 GPS Functions
Configuration using KPG-D1/ D1N
Configuring GPS Report Interval Time (
> GPS > GPS Report Interval Time)
GPS Time Mark
GPS Time Mark is the offset time from UTC (Coordinated Universal Time) to send GPS data.
This function is useful for avoiding a data collision if there are many transceivers that send GPS data.
Configuring a different timing for each transceiver allows each transceiver to send GPS data with different timing. Using this
function can avoid a data collision.
Configuration using KPG-D1/ D1N
Configuring GPS Time Mark (
GPS Message Type
GPS Message Type allows the transceiver to change the length of the message to send GPS data.
Configuration
Full The message to be sent is the GPS data corresponding to $GPGGA, $GPRMC and $GPGLL.
The message to be sent is the GPS data corresponding to $GPGLL.
Short
When the base station receives this GPS data, a part of the data is sent as blank data even if
$GPGGA and $GPRMC are configured for PC serial output at Base Station Setting.
Configuration using KPG-D1/ D1N
Configuring GPS Message Type (
GPS)
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > Personal > Personal Features > DMR Conventional
Transceiver Settings > Personal > Personal Features > DMR Conventional > GPS)
Table 1-19 GPS Message Type
Transceiver Settings > Personal > Personal Features > DMR Conventional >
Behavior
CONTENTS
70
INDEX