Kenwood NX-5000 Series Function Reference page 150

3 COMMUNICATION SECURITY
3.10 Multi-key List
DES encryption type (Built-in DES)
In Multi-key List, a CKR ID, which is encryption key information used to associate it with an Encryption Key configured in
the transceiver, must be configured.
0
CKR ID
CKR ID 1 to CKR ID 4 are automatically configured.
0
Key Name
Key Name allows you to configure using a maximum of 14 alphanumeric characters and symbols a name corresponding
to the Encryption Key.
Enhanced Encryption format
To use the Enhanced Encryption format, an Encryption Key needs to be configured in the Multi-key List.
0
Key Data
Key Data allows you to configure the Encryption Key in the range of 1 to FFFFFFFFFE.
0
Key ID
Key Data allows an ID code for identifying an Encryption Key to be configured to a value between 1 to 255.
0
Key Name
Key Name allows you to configure using a maximum of 14 alphanumeric characters and symbols a name corresponding
to the Encryption Key.
A Multi-key List Number corresponding to the Encryption Key configured in the Multi-key List can be configured for each
channel.
Configuration using KPG-D1/ D1N
Configuring Multi-key List (
3.11 Transmit Clear Alert Tone
Transmit Clear Alert Tone is the function used to notify a user with a short beep that the communication data is not
encrypted when the transceiver starts transmitting without communication data being encrypted.
With this function enabled, the Transmit Clear Alert Tone (1 beep) sounds from the transceiver if the Encryption function of
the channel is disabled when the transceiver transmits.
Configuration using KPG-D1/ D1N
Configuring Transmit Clear Alert Tone to be enabled or disabled (
Scrambler/Encryption Status Memory
3.12
Scrambler/Encryption Status Memory is the function to retain the enabled or disabled status of the Encryption function
for each channel and the configuration of a Multi-key for each channel.
If Scrambler/Encryption Status Memory is enabled, the stored configurations of the enabled/disabled status of the
Encryption function and Multi-key List Number are read as default when data is read from the transceiver by using KPG-
D1/ D1N.
Configuration using KPG-D1/ D1N
Configuring Scrambler/Encryption Status Memory (
1 > Others)
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > Encryption > Multi-key List)
Transceiver Settings > Optional Features > Optional Features
Transceiver Settings > Encryption > General)
CONTENTS INDEX
133