Kenwood NX-5000 Series Function Reference page 181

6 KEY OPERATIONS FOR EACH MODE
Key
Press
Menu ([Q])
Press
Back ([O])
Hold
Down
Press
Function ([W])
Press
Home ([T])
*1 *2
Press
Side 1 or [+]
*1 *2
Press
Side 2 or [-]
*1 Press
Side 3
Press
[G]/ [H]
Hold
Down
Press
[E]/ [F] or
*2
[ ]/ [ ]
Hold
Down
*3 -
Selector
*1
-
Lever Switch
[0] to [9] Press
[*] Press
Press
[#]
Hold
Down
PTT Switch Press
*1 Portable only
*2 KCH-20R (Featured Panel) only
Portable and KCH-20R (Featured Panel) only
*3
DMR FUNC (K, F)/Ver 2.20
Selecting a list
A
12 : 34
M
Remote Control 002
TRUCK 824
TRUCK 825
TRUCK 826
N ex t B a c k
Migrates to the Remote Control
Option selection display.
Returns to the menu (if the
transceiver enters this mode by
pressing the Menu key).
-
Migrates to the code entry mode
(only if Manual Dialing is enabled).
Selects Unit IDs registered in the
Individual ID List one at a time.
Selects Unit IDs registered in the
Individual ID List continuously.
Migrates to the Remote Control Option selection display.
The configured function functions after aborting the current mode.
The configured function functions after aborting the current mode.
Directly selects a Unit ID registered
in the list.
Migrates to the Remote Control
Option selection display.
Returns to the menu (if the
transceiver enters this mode by
pressing the Menu key).
-
Transmits after aborting the current mode.
Remote Control Mode
Manual entry
12 : 34
Remote Control
UID 1
Se lec t Del ete
Migrates to the Remote Control
Option selection display.
Finalizes the Digit No. (While the
Digit No. is flashing)
Deletes one character.
Returns to the menu if no character
is entered (if the transceiver enters
this mode by pressing the Menu
key).
Deletes all characters.
Migrates to the list selection mode.
Aborts the current mode.
The configured function functions.
The configured function functions.
The configured function functions.
Selects Digit No. one at a time.
Selects Digit No. continuously.
-
Enters the Digit No.
Migrates to the Remote Control
Option selection display.
Finalizes the Digit No. (While the
Digit No. is flashing)
Deletes one character.
Returns to the menu if no character
is entered (if the transceiver enters
this mode by pressing the Menu
key).
Deletes all characters.
CONTENTS
Selecting a list
A
12 : 34
M
Remote Control
Stun
Revive
Kill
Se nd Bac k
Transmits the selected Remote
Control Message after aborting the
current mode.
Returns to the menu (if the
transceiver enters this mode by
pressing the Menu key).
-
-
Selects configuration items one at
a time.
Selects configuration items
continuously.
Migrates to the Unit ID list selection
mode.
-
Selects a configuration item from
the list.
Transmits the selected Remote
Control Message after aborting the
current mode.
Returns to the menu (if the
transceiver enters this mode by
pressing the Menu key).
-
Transmits the selected Remote
Control Message after aborting the
current mode.
INDEX
A
M
1
164