Kenwood NX-5000 Series Function Reference page 33

1 DMR CONVENTIONAL SYSTEM
1.4 Using DMR ID to Initiate a Selective Call
In Individual Call Mode, a Unit ID of the target transceiver can be selected from the Individual ID List or a Unit ID can directly
be entered. Also, in Status Mode, a status to be sent can be selected from the Status List or the status can directly be
entered. In either mode, the entry method can be changed by pressing and holding the Function [W] key.
Note
If Manual Dialing is enabled, a Unit ID and status can be manually entered.
Reception
Checking the incoming call history of a received Individual Call, Group Call, Status Message
or Short Message
DMR FUNC (K, F)/Ver 2.20
Function ([ ]) key
Normal Mode
Receiving an Individual Call,
Press any key.
a Group Call, a Status Message
or a Short Message.
Each Receive Mode
Normal Mode
Stack Mode
Home ([ ]) key
Press the [ ] or [ ] key.
Status Message/ Short Message display
Time Stamp display
Channel Name display
Caller ID display
Status Mode
Status List selection
Function ([ ]) key
Press the Stack key.
CONTENTS
16
INDEX