Kenwood NX-5000 Series Function Reference page 27

1 DMR CONVENTIONAL SYSTEM
1.1 Initiating Voice Communications (Basic Transmission and Reception)
Configuration using KPG-D1/ D1N
0
Assigning functions to the PF keys on the transceiver (
0
Configuring Talk Around to be enabled or disabled (Personality) (
> DMR Conventional > General)
0
Configuring Talk Around to be enabled or disabled (Channel Edit) (
Channel Edit > DMR Conventional > General)
0
Configuring Talk Around Key to be enabled or disabled (Personality) (
Personality > DMR Conventional > General)
0
Configuring Talk Around Key to be enabled or disabled (Personality) (
Channel Edit > DMR Conventional > General)
DMR Direct Mode
DMR Direct Mode is the function allowing direct communication between transceivers without using a repeater.
If the transmit frequency and receive frequency are the same configuration on a DMR digital channel, the channel can be
used in DMR Direct Mode. Also, the channel can be used in DMR Direct Mode even if the Talk Around function is enabled.
Simultaneous Communications by Dual Slot Direct Mode
The DMR Direct Mode communication methods have the new version (ETSI TS 102 361-1 V2.2.1 2013-02 or later) and old
version (earlier than ETSI TS 102 361-1 V2.2.1 2013-02).
Which version is used to communicate can be configured by configuring Dual Slot Direct Mode by using KPG-D1/ D1N.
Configuration
The transceiver communicates using the new version of DMR Direct Mode.
In the new version of DMR Direct Mode, if the slot numbers are different, communications of 2
Enabled
parties can be realized separately without receiving interference even on the channel with the
same frequency configured.
The transceiver communicates using the old version of DMR Direct Mode.
In the old version of DMR Direct Mode, if the slot numbers are different, communications of 2
Disabled
parties cannot be realized separately without receiving interference even on the channel with the
same frequency configured.
Note
Communication cannot be realized between the transceiver configured with the new version of DMR Direct Mode and the
transceiver configured with the old version of DMR Direct Mode.
Configuration using KPG-D1/ D1N
0
Configuring Dual Slot Direct Mode to be enabled or disabled (Personality) (
Personality > DMR Conventional > DMR)
0
Configuring Dual Slot Direct Mode to be enabled or disabled (Channel Edit) (
Channel > Channel Edit > DMR Conventional > DMR)
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > Key Assignment)
Table 1-4 Dual Slot Direct Mode
Description
Transceiver Settings > Personal > Personality
Transceiver Settings > Zone/Channel >
Transceiver Settings > Personal >
Transceiver Settings > Zone/Channel >
Transceiver Settings > Personal >
Transceiver Settings > Zone/
CONTENTS INDEX
10