Kenwood NX-5000 Series Function Reference page 65

1 DMR CONVENTIONAL SYSTEM
1.10 Sending and Receiving a Status Message (Status Call)
Base ID
Base ID is the target transceiver's ID used to send GPS data or Transparent data and the following Status Messages and
Short Messages.
0
AUX Input Status Message (Mobile Only)
0
Power-on Status Message
0
Power-off Status Message
0 A Status Message that is sent by selecting a status number or directly entering a status number after the transceiver
enters Status Mode by pressing the Status key or the [0] to [9] keys on the keypad
0 A Status Message that is sent by selecting a status number or directly entering a status number after the transceiver
enters Status Mode by a user selecting "Status" from Menu Mode
0 A Status Message that is sent by pressing any of the PF keys having "Call 1" to "Call 6" allocated
0 A Status Message that is sent when any of the AUX Input ports having "Call 1" to "Call 6" allocated becomes active (Mobile
only)
0 A Short Message that is sent by entering a text string after the transceiver enters Short Message Mode by pressing the
Short Message key or the [0] to [9] keys on the keypad
0 A Short Message that is sent by entering a text string after the transceiver enters Short Message Mode by a user selecting
"Short Message" from Menu Mode
Base ID can be configured using KPG-D1/ D1N. Either Unit ID or Group ID can be configured. ID of the base station that
manages operations is normally configured for Base ID.
Configuration using KPG-D1/ D1N
Configuring Base ID Type and Base ID (
> DMR)
Emergency Status Response
Emergency Status Response is the function to emit an Alert Tone when the transceiver receives an Emergency Status.
The transceiver behaves as follows according to the configuration using KPG-D1/ D1N.
Configuration
The Alert Tone configured for Alert Tone (Emergency Response) sounds from the transceiver
Alert Tone
when receiving an Emergency Status.
If receiving an Emergency Status, the Alert Tone configured for Alert Tone (Emergency
Horn (Mobile only)
Response) sounds from the transceiver and the Horn Alert port is activated.
If the transceiver receives an Emergency Status for which voice guidance is configured, the voice
guidance is executed. If Alert Tone is enabled, voice guidance is executed after an Alert Tone is
emitted.
Voice Announcement
To configure voice guidance for Voice Announcement, "User Programmable" needs to be
configured in Voice Announcement Type.
Configuration using KPG-D1/ D1N
0
Configuring Emergency Status Response (Alert Tone/ Horn/ Voice Announcement) (
> DMR > DMR Information > General > Emergency Status Response)
0
Configuring Alert Tone (Emergency Response) (
Conventional > Alert Tone)
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > Personal > Personal Features > DMR Conventional
Table 1-13 Emergency Status Response
Transceiver Settings > DMR > DMR Information >
Description
CONTENTS
Transceiver Settings
48
INDEX