Kenwood NX-5000 Series Function Reference page 40

1 DMR CONVENTIONAL SYSTEM
1.5 Making an Individual Call
Displaying the ID of the Communicating Caller on the LCD (Caller ID Display)
Caller ID Display is the function to display the received ID on the transceiver display when an Unaddressed Call is received.
While this function is enabled, the Unit ID Name or Unit ID of the transmitting transceiver appears if an Unaddressed Call
is received and the received Color Code matches the Color Code preconfigured for the transceiver.
A user can identify the caller not only by voice, but also through the display.
Note
If the ID Name of the transmitting transceiver is configured in the Individual ID List, the ID Name of the transmitting
0
transceiver appears. If the ID Name of the transmitting transceiver is not configured in the Individual ID List, the Unit ID
of the transmitting transceiver appears.
If the transceiver receives an Individual Call or Group Call, Caller ID Display does not function. If the transceiver receives
0
an Individual Call, the Unit ID of the transmitting transceiver appears. If the transceiver receives a Group Call, the ID
appears according to the configuration in Unit ID Display on Group Call. (Refer to
Receives a Group Call (Unit ID Display on Group
A user cannot reply to an ID on the transceiver while the ID appears on the main display.
0
The Unit ID received can be sent from the communication port of the transceiver. (Refer to
0
ID from the Communication Port (Unit ID Serial
Configuration using KPG-D1/ D1N
Configuring Caller ID Display (
Restricting IDs for Which the Transceiver Can Initiate a Call (Individual ID Encode
Block)
Individual ID Encode Block is the range of the Unit ID used by the transceiver to initiate a call.
A Unit ID with which a user is allowed to initiate a call can be restricted using KPG-D1/ D1N. A user can initiate a call to a
Unit ID configured in the Individual ID List even if it is outside the range of Individual ID Encode Block.
The transceiver for which Individual ID Encode Block is not configured can initiate a call to all transceivers.
The transceiver unmutes the speaker and emits received audio when the transceiver receives the Unit ID satisfying the
receiving conditions. In this case, the Unit ID of the transmitting transceiver appears on the receiving transceiver. If the Unit
ID of the transmitting transceiver is in the range of the Individual ID Encode Block or has been registered in the Individual
ID List, the receiving transceiver can respond to the transmitting transceiver by pressing the PTT switch. If the Unit ID of
the transmitting transceiver is outside the range of the Individual ID Encode Block and also has not been registered in the
Individual ID List, the receiving transceiver cannot respond to the transmitting transceiver.
Configuration using KPG-D1/ D1N
Configuring Individual ID Encode Block (
Conventional > DMR)
DMR FUNC (K, F)/Ver 2.20
Call).)
Output).)
Transceiver Settings > DMR > DMR Information > Conventional)
Transceiver Settings > Personal > Personal Features > DMR
Display When the Transceiver
Sending the Received Unit
CONTENTS INDEX
23