Kenwood NX-5000 Series Function Reference page 16

Revision History
Date
24) Added description on the use of PC commands and Unit ID Serial Output in "1.13 Calling All
Transceivers Having the Same Color Code (Unaddressed Call)".
25) Revised the descriptions in "1.14 Terminating Voice Communications by a Transceiver Other Than the
Transmitting Transceiver (Call Interruption)" as follows:
Changed "Busy Channel Lockout (Interrupt CALL)" to "In-call Busy Channel Lockout (Interrupt CALL)".
Added supplementary notes.
Added "Sending a Call Interruption Request Message" and "Receiving a Call Interruption Request
Message".
26) Deleted "GPS Data Query Request" from "GPS Report Back to Requested ID".
27) Added description on In-call Busy Channel Lockout in the supplementary notes of "Monitoring the
Situation Around Another Transceiver by Remote Control (Remote Monitor)".
28) Added "1.19 Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming)".
29) Added supplementary notes on the emission of Emergency Locator Tone in "Duration of Locator Tone
1" and "Duration of Locator Tone 2".
30) Made changes to the overall description in "3 COMMUNICATION SECURITY". Added the following
descriptions:
Enhanced Encryption format
2017.5.31
Secure Cryptographic Module
31) Added description on Non-Priority Scan LED and Priority Scan LED to the following sections:
4.2 Scanning in One Zone (Single Scan)
4.3 Scan by Registering Multiple Target Channels for Scan in the List (List Scan)
4.4 Scanning All Target Zones for Scanning (Multi-Zone Scan)
32) Added description on LTR and Conventional in Table 4-1.
33) Changed the transceiver screen in "4.4 Scanning All Target Zones for Scanning (Multi-Zone Scan)".
34) Added supplementary notes on Priority-channel Stop Tone in "4.5 Scanning the Specific Channel
Preferentially (Priority Scan)".
35) Revised the description in "Priority-channel Stop Tone".
36) Added the following tones to "7 Beep List".
Search Mode Tone
Busy Tone 2
System Select Tone
Key Fail Alert Tone
37) Changed the version number from 1.00 to 2.20.
DMR FUNC (K, F)/Ver 2.20
Description
CONTENTS
xv
INDEX