Kenwood NX-5000 Series Function Reference page 158

4 SCAN
4.3 Scan by Registering Multiple Target Channels for Scan in the List (List Scan)
0
Deleting a member from List Scan
1
Select the channel for which the Scan List to be edited is configured and then press the
A Key Beep A (1 beep) sounds from the transceiver.
The transceiver enters Scan Program Mode and the edit screen of the Scan
List appears.
The following operations are identical even if the transceiver enters Scan
Program Mode by pressing the Menu key.
Note
If the selected channel is registered in the Scan List, the "a" icon
appears on the left of the channel name.
2
Select a Zone-channel to be deleted from the Scan List.
Select a channel by pressing the [G] or [H] key.
Select a zone by pressing the [E] or [F] key.
Refer to Common FUNC
selection methods.
3
Press the Menu ([
Key Beep B (2 beeps) sounds from the transceiver, and then the Zone-
channel selected in Step 2 is deleted from the Scan List. The "a" icon
disappears from the left of the channel name.
Note
In the following cases, a member cannot be deleted from the Scan List:
If the zone channel to be deleted from the Scan List is a Priority Channel
0
If the number of members registered in the Scan List is zero
0
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the transceiver (
DMR FUNC (K, F)/Ver 2.20
"Selecting or Clearing Data from a
]) or [ ] key.
List" for
Transceiver Settings > Key Assignment)
CONTENTS
Scan Program key.
A
12 : 34
M
S c a n L i s t 1
Zone 1
Channel 1
Channel 2
D/ A CH Ba c k
A
12 : 34
M
S c a n L i s t 1
Zone 1
Channel 1
Channel 2
D/ A CH Ba c k
A
12 : 34
M
S c a n L i s t 1
Zone 1
Channel 1
Channel 2
D/ A CH Ba c k
141
INDEX