Kenwood NX-5000 Series Function Reference page 190

INDEX
Terminating Voice Communications by a
Transceiver Other Than the Transmitting
Transceiver (Call Interruption)
The ID of the Target Transceiver (GPS Base ID)
Toggling the Encryption during Transmission
between Enabled and Disabled
TOT Pre-alert
TOT Rekey Time
TOT Reset Time
Transceiver Behavior during the Scan
Transceiver Behavior in the Case that the Scan
Cannot Be Resumed (List Scan)
Transceiver Behavior in the Case that the Scan
Cannot Be Resumed (Multi-Zone Scan)
Transceiver Behavior in the Case that the Scan
Cannot Be Resumed (Single Scan)
Transceiver Behavior upon Receipt of Encrypted
Communication Data
Transceiver Behavior When a Zone-channel Is
Changed during the Scan
Transceiver behavior when receiving a Group
Call
Transceiver behavior when receiving an
Individual Call (Individual Call Acknowledge
Request)
Transceiver behavior when receiving an
Individual Call/ Paging Call
Transceiver Behavior When the Transceiver
Receives an Emergency Status
Transition for Each Mode
Transmission Method of GPS Data
Transmit Busy Wait Time
Transmit Clear Alert Tone
Transmit Duration
Transmitting
Using a Channel Being Used by Other Parties
(BCL Override)
Using DMR ID to Initiate a Selective Call
Using Motion Detection and Stationary
Detection Simultaneously (Man-down with
Stationary)
Using the Signaling
DMR FUNC (K, F)/Ver 2.20
T
118
150
139
143
136
121
150
115
133
101
U
115
60 Waiting for Both Digital Signals and Analog
Signals (Mixed Mode)
66
Zone-channel Functioning in Emergency Mode
5
5
6
32
28
21
15
65
38
4
8
15
12
W
Z
CONTENTS INDEX
13
98
173