Kenwood NX-5000 Series Function Reference page 97

1 DMR CONVENTIONAL SYSTEM
1.18 Remote Operation by Radio Communication (Remote Control)
Note
To receive a Remote Monitor request message and accept the received message, Remote Monitor needs to be enabled.
0
The transceiver initiates a continuous transmission only if the message requesting the Remote transmission is received
0
by an Individual Call. The transceiver does not initiate a continuous transmission even if the message requesting the
Remote transmission is received using anything other than Individual Call.
While the transceiver is in the status of continuous transmission by Remote Monitor, the Time-out Timer, Busy Channel
0
Lockout and In-call Busy Channel Lockout functions are disabled.
The received Color Code and the Color Code configured for the transceiver need to match to receive a Remote Monitor
0
request message.
Configuration using KPG-D1/ D1N
0
Configuring Remote Monitor to be enabled or disabled (
> DMR Conventional > DMR > Remote Monitor)
0
Configuring Remote Monitor Timer (
> DMR > Remote Monitor)
0
Configuring Remote Monitor Display (
Conventional > DMR > Remote Monitor)
Checking Whether Another Transceiver Is in Operation (Radio Check)
Radio Check can be used to check by using radio communication whether an individually specified transceiver is operated
in the system.
An individually specified transceiver can be controlled by sending a Radio Check message in Remote Control Mode and by
making the transceiver receive the message. (Refer to
Note
Whether to accept a Radio Check message when the transceiver receives the Radio Check message can be configured
0
using KPG-D1/ D1N.
The received Color Code and the Color Code configured for the transceiver need to match to receive the Radio Check
0
message.
Configuration using KPG-D1/ D1N
Configuring Radio Check to be enabled or disabled (
Conventional > DMR)
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > Personal > Personal Features
Transceiver Settings > Personal > Personal Features > DMR Conventional
Transceiver Settings > Personal > Personal Features > DMR
Sending a Remote Control Message in Remote Control
Transceiver Settings > Personal > Personal Features > DMR
CONTENTS INDEX
Mode.)
80