Kenwood NX-5000 Series Function Reference page 179

6 KEY OPERATIONS FOR EACH MODE
Key
Press
Menu ([Q])
Press
Back ([O])
Hold
Down
Press
Function ([W])
Press
Home ([T])
*1 *2 Press
Side 1 or [+]
*1 *2 Press
Side 2 or [-]
*1
Press
Side 3
Press
[G]/ [H]
Hold
Down
Press
*2
[E] or [ ]
Hold
Down
Press
*2
[F] or [ ]
Hold
Down
*3
-
Selector
*1
-
Lever Switch
[0] to [9] Press
[*] Press
Press
[#]
Hold
Down
PTT Switch Press
*1 Portable only
KCH-20R (Featured Panel) only
*2
Portable and KCH-20R (Featured Panel) only
*3
DMR FUNC (K, F)/Ver 2.20
Status Mode
Manual entry
Status
Status
Transmits the status after aborting the current mode (after
finalizing the Digit No.).
Finalizes the Digit No. (While the Digit No. is flashing)
Returns to the menu if no character is entered (if the transceiver enters this mode by pressing the Menu key).
Migrates to the list selection mode.
Selects Digit No. one at a time.
Selects Digit No. continuously.
Migrates to Individual Call Mode or Group Call Mode.
-
-
-
The configured function functions after aborting the current mode.
The configured function functions after aborting the current mode.
Enters the Digit No.
Transmits the status after aborting the current mode (after
finalizing the Digit No.).
Finalizes the Digit No. (While the Digit No. is flashing)
Returns to the menu if no character is entered (if the transceiver enters this mode by pressing the Menu key).
Transmits the status after aborting the current mode.
Manual entry
A
12 : 34
M
B a c k
Sends the message after aborting the current mode (after
finalizing the characters).
Finalizes the characters. (While the characters are
flashing)
Deletes one character.
Deletes all characters.
Switches character types (upper case/lower case/figure).
Aborts the current mode.
The configured function functions.
The configured function functions.
The configured function functions.
If "Characters" is configured in Up/Down:
Selects characters one at a time.
If "Line Up/Down" is configured in Up/Down:
Shifts the cursor up and down.
If "Characters" is configured in Up/Down:
Selects characters continuously.
If "Line Up/Down" is configured in Up/Down:
Shifts the cursor up and down continuously.
Shifts the cursor to the left.
Migrates to Individual Call Mode or Group Call Mode if no
character is entered.
Shifts the cursor to the left continuously.
Shifts the cursor to the right.
Shifts the cursor to the right continuously.
Enters characters.
Switches character types (upper case/lower case/figure)
(after finalizing the characters).
Finalizes the characters. (While the characters are
flashing)
Deletes one character.
Deletes all characters.
Sends the message after aborting the current mode.
CONTENTS
Short Message Mode
A
12 : 34
M
Short Message A
Message?
B ac k
INDEX
162