Kenwood NX-5000 Series Function Reference page 101

1 DMR CONVENTIONAL SYSTEM
1.19 Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming)
Note
The configurations by using KPG-D1/ D1N are restricted as follows according to the configuration for Zone-channel
0
Format (Personality or Channel Table).
Personality:
A minimum of 2 Personalities and a maximum of 512 Personalities can be configured for a system that is configured
0
as "DMR Site Roaming".
The following functions cannot be configured for the Personalities that are configured as "DMR Site Roaming".
0
Scan Add
0
Scan List Number
0
Channel Table:
A minimum of 2 channels and a maximum of 512 channels can be configured for a zone that is configured as "DMR
0
Site Roaming".
The following functions cannot be configured for the channels that are configured as "DMR Site Roaming".
0
Scan Add
0
Scan List Number
0
Emergency Profile Number
0
Key Assignment
0
The Personalities or channels that are configured as "DMR Site Roaming" cannot be configured for the following functions.
0
Home Channel
0
Scan List Members
0
Data System-Personality (DMR) (Data Zone-Channel (DMR))
0
Emergency Zone-Channel
0
The following key operations are disabled on the Personalities or channels that are configured as "DMR Site Roaming".
0
Home Channel key
0
Home Channel Select key
0
Scan key
0
The Emergency behavior of the transceiver on the Zone-channel of DMR Site Roaming is in accordance with the
0
configuration of Emergency Channel Type.
If "Personality" is configured for Zone-channel Format and the following conditions are met, the Emergency Mode starts
0
up in the Personality of Revert.
"Selected" is configured for Emergency Channel Type
0
DMR Site Roaming channel is selected
0
The Revert Channel during Site Roaming will be backed up even when the transceiver is turned off. However, if "Channel
0
Table" is configured for Zone-channel Format, the backed-up Revert Channel will be cleared when the Zone-channel
is changed. If "Personality" is configured for Zone-channel Format, the backed-up Revert Channel will not be cleared
when the Zone-channel is changed.
Site Roaming starts if the Zone-channel is changed and a DMR Site Roaming channel is selected while scan is enabled.
0
If a Zone-channel of DMR Site Roaming is configured as the selected Zone-channel when the transceiver turns on, the
0
transceiver will behave as follows.
When "Channel Table" is configured for Zone-channel Format
0
The backed-up Revert Channel is cleared and the transceiver starts up in the preset DMR Site Roaming Zone-
channel.
When "Personality" is configured for Zone-channel Format
0
The transceiver starts up in the Personality in question if the Personality of Revert is backed up. The transceiver
starts up in the Personality configured for the channel if the Personality of Revert is not backed up.
Among the Personalities (Channels), the following functions will behave according to the selected Personality (Channel)
0
instead of that of Revert.
Lone Worker
0
Activity Detection
0
DMR FUNC (K, F)/Ver 2.20
CONTENTS INDEX
84