Kenwood NX-5000 Series Function Reference page 46

1 DMR CONVENTIONAL SYSTEM
1.6 Initiating an Individual Call After Ensuring That the Target Party Is Available for Communications (Individual Call Acknowledge Request)
Configuration using KPG-D1/ D1N
0
Configuring Selective Call Alert LED to be enabled or disabled (
> Conventional)
0
Configuring Optional Signaling LED to be enabled or disabled (
> Conventional)
0
Configuring Alert Tone (Individual) (Individual ID List) (
Tone)
0
Configuring Alert LED Color (Individual) (Individual ID List) (
Alert LED Color)
0
Configuring Alert Tone (Individual Call) used in common in a DMR Conventional system (
> DMR > DMR Information > Conventional > Alert Tone)
0
Configuring Alert LED Color (Individual Call) used in common in a DMR Conventional system (
Settings > DMR > DMR Information > Conventional > Alert LED Color)
Notifying the User with a Tone That a Call Request Has Been Initiated (Call Request
Tone)
Call Request Tone is the function to emit a Call Request Tone (1 beep) from the transceiver when a call request for an
Individual Call (Individual Call Acknowledge Request) is initiated in a DMR Conventional system.
The Call Request Tone (1 beep) from the transceiver notifies the user that a call request for an Individual Call (Individual
Call Acknowledge Request) has been initiated.
The user can initiate the communication after the call request has been established.
Configuration using KPG-D1/ D1N
Configuring Call Request Tone to be enabled or disabled (
> DMR Conventional > DMR > Individual Call Acknowledge Request)
Notifying the User with a Tone That a Call Request Is in Progress (Call Processing
Tone)
Call Processing Tone is the function to emit a Call Processing Tone (2 beeps) from the transceiver until the transceiver
receives an acknowledgment message from the receiving transceiver after the call request for an Individual Call (Individual
Call Acknowledge Request) is initiated in a DMR Conventional system.
The Call Processing Tone (2 beeps) from the transceiver notifies a user that the call request for an Individual Call (Individual
Call Acknowledge Request) is in progress. A Call Processing Tone stops when the call request is established, and the user
can initiate the communication.
After the call request for an Individual Call (Individual Call Acknowledge Request) is initiated, a Call Processing Tone (2
beeps) sounds from the transceiver upon the elapse of the time configured for Call Processing Tone Delay Time.
Configuration using KPG-D1/ D1N
Configuring Call Processing Tone and Call Processing Tone Delay Time (
Personal Features > DMR Conventional > DMR > Individual Call Acknowledge Request > Call Processing Tone)
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > DMR > DMR Information
Transceiver Settings > DMR > DMR Information
Transceiver Settings > DMR > Individual ID List > Alert
Transceiver Settings > DMR > Individual ID List >
Transceiver Settings > Personal > Personal Features
Transceiver Settings > Personal >
CONTENTS
Transceiver Settings
Transceiver
29
INDEX