Kenwood NX-5000 Series Function Reference page 121

2 COMMUNICATIONS IN AN EMERGENCY
2.5 Indication and Sound in Emergency Mode
Emergency LED
Emergency LED is the function to light the Transmit LED when the transceiver transmits in Emergency Mode and light the
Busy LED when the transceiver receives in Emergency Mode.
The transceiver behaves as follows depending on the Emergency LED configuration.
0
If the Emergency LED is enabled:
While in Emergency Mode, the Transmit LED is on during data transmission, and the Busy LED is on during data
0
receipt.
For Portable, if "Audible" is configured in Emergency Mode Type, the backlight lights while the transceiver is in
0
Emergency Mode.
The Busy LED lights even though the received audio is not output due to the output of the Locator Tone while the
0
transceiver is on the traffic channel.
For Portable, if the transceiver enters Emergency Mode while the backlight is lit, the backlight continues to light.
0
However, when "Silent" is configured in Emergency Mode Type, the backlight turns off when entering Emergency
Mode.
For Mobile, regardless of the configuration in Emergency LED and the configuration in Emergency Mode Type, the
0
state of the backlight when the transceiver enters Emergency Mode does not change.
0
If the Emergency LED is disabled:
While in Emergency Mode, the Transmit LED is off during data transmission, and the Busy LED is off during data
0
receipt.
For Portable, the backlight does not light while the transceiver is in Emergency Mode.
0
For Portable, if the transceiver enters Emergency Mode while the backlight is lit, the backlight turns off.
0
For Mobile, regardless of the configuration in Emergency LED and the configuration in Emergency Mode Type, the
0
state of the backlight when the transceiver enters Emergency Mode does not change.
Configuration using KPG-D1/ D1N
Configuring Emergency LED (
Surveillance Mode
Surveillance Mode is the function to continue the Surveillance function as enabled even if the transceiver enters Emergency
Mode while the Surveillance function is enabled.
While the Surveillance function is enabled, the transceiver does not emit a tone or light the backlight even when the
transceiver functions.
The Surveillance function is used when the change of the transceiver status needs to be kept unnoticed, such as while on
a Public Safety operation.
The transceiver behaves as follows according to the configuration in Surveillance Mode:
0
If Surveillance Mode is enabled
Even if the transceiver enters Emergency Mode while the Surveillance function is enabled, the Surveillance function
remains enabled, and the transceiver does not emit a tone and the backlight and LED do not light. The Surveillance
function remains enabled even if the transceiver exits Emergency Mode.
0
If Surveillance Mode is disabled
The Surveillance function is disabled if the transceiver enters Emergency Mode while the Surveillance function is enabled.
The transceiver behaves according to the configurations in Emergency Mode when the transceiver is placed in
Emergency Mode. The Surveillance function remains disabled even if the transceiver exits Emergency Mode.
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > Emergency Information > Emergency Profile)
CONTENTS INDEX
104