Kenwood NX-5000 Series Function Reference page 122

2 COMMUNICATIONS IN AN EMERGENCY
2.5 Indication and Sound in Emergency Mode
Note
While in Emergency Mode, the Surveillance function cannot be toggled between enabled and disabled by operating the
transceiver.
Configuration using KPG-D1/ D1N
Configuring Surveillance Mode to be enabled or disabled (
Information)
2.6 ID Sent When Emergency Mode is Activated
The Emergency ID can be sent each time the transceiver starts automatic transmission and reception in Emergency Mode.
Emergency ID
In a DMR Conventional system, an Emergency ID is the type of code to be sent out each time the transceiver starts
automatic emergency transmission and reception in Emergency Mode.
Configuration
The transceiver transmits and receives according to the configuration for Color Code of the Zone-channel
None
used for Emergency Mode.
When transmitting in Emergency Mode, the transceiver initiates a Group Call or an Individual Call according
to the configurations for Emergency DMR ID Type and Emergency DMR ID.
Also, the following status IDs that are sent when automatic transmission in Emergency Mode is started
can be configured for each factor that activates Emergency Mode (Emergency Key, Lone Worker, Man-
down, Stationary, or Motion):
0
Emergency Call Status
The status ID that is sent when the transceiver enters Emergency Mode by pressing the Emergency
key
0
Lone Worker Status
The status ID that is sent when the transceiver enters Emergency Mode by the Lone Worker function
DMR
0
Man-down Status
The status ID that is sent when the transceiver enters Emergency Mode by the Man-down function
0
Stationary Status
The status ID that is sent when the transceiver enters Emergency Mode by the Stationary function
0
Motion Status
The status ID that is sent when the transceiver enters Emergency Mode by the Motion function
If the status ID of the corresponding activation factor is not configured and the activation factor places
the transceiver in Emergency Mode, the status ID configured in Emergency Call Status is sent.
Configuration using KPG-D1/ D1N
0
Configuring Emergency ID (DMR Conventional) (
Conventional > Emergency > Emergency ID (DMR Conventional))
0
Configuring various status IDs (
Emergency > Emergency ID (DMR Conventional))
DMR FUNC (K, F)/Ver 2.20
Table 2-8 Emergency ID (DMR Conventional)
Description
Transceiver Settings > Personal > Personal Features > DMR
Transceiver Settings > Personal > Personal Features > DMR Conventional >
Transceiver Settings > Emergency > Emergency
CONTENTS
105
INDEX