Kenwood NX-5000 Series Function Reference page 153

4 SCAN
4.2 Scanning in One Zone (Single Scan)
Configuration using KPG-D1/ D1N
0
Assigning functions to the PF keys on the transceiver (
0
Configuring Scan Add to be enabled or disabled (
Conventional > General)
0
Configuring Scan Type (
0
Configuring "Scan" Displayed to be enabled or disabled (
General)
Conditions to Activate the Scan (Single Scan)
One of the following conditions must be satisfied for the transceiver to start the Single Scan:
Two or more channels exist in the zone where the transceiver scans.
0
A channel to be scanned and a Priority Channel exist in the zone.
0
Even if no channel to be scanned exists, Priority Channel 1 and Priority Channel 2 exist in the zone.
0
Conditions to Resume the Scan (Single Scan)
One of the following conditions must be satisfied to resume the scan while the transceiver pauses the scan:
Two or more channels exist in the zone where the transceiver scans.
0
A channel to be scanned and a Priority Channel to be scanned exist in the zone.
0
Even if no channel to be scanned exists, Priority Channel 1 and Priority Channel 2 to be scanned exist in the zone.
0
If the transceiver does not satisfy the conditions to resume the scan, the scan remains paused.
Transceiver Behavior in the Case that the Scan Cannot Be Resumed (Single Scan)
If the transceiver manually switches during the scan to the zone or channel which does not satisfy the condition to resume
the scan, the transceiver displays the selected channel and the scan remains paused.
If the PTT switch is pressed while the condition to resume the scan is not satisfied, the transceiver transmits using the
Revert Channel. Upon elapse of the time configured in Dwell Time after completion of the transmission, the transceiver
reverts to the selected channel; however, the scan does not resume.
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > Zone/Channel > Channel Edit > DMR
Transceiver Settings > Zone/Channel > Zone Edit > Scan)
Transceiver Settings > Key Assignment)
Transceiver Settings > Scan > Scan Information >
CONTENTS
136
INDEX