Kenwood NX-5000 Series Function Reference page 59

1 DMR CONVENTIONAL SYSTEM
1.10 Sending and Receiving a Status Message (Status Call)
2
Press the Function [
The status entry display appears.
3
Enter a status.
Refer to Common FUNC
method.
0
Using the PF keys
A numeric character can be selected by pressing the [G] key or the [H]
key, and pressing the Menu ([Q]) or [*] key can confirm the selected
numeric character.
0 Using the keypad
A code can be entered by pressing the [0] to [9] keys.
4
Press the PTT switch or the
The transceiver sends the Status Message.
If the Status Message is properly sent to the target transceiver, "Complete"
appears.
Note
0 The entry screen for status closes at the same time as pressing the PTT switch or Menu ([Q]) key. If entering status and
sending a Status Call again, reexecute the operations from step 1.
Transmission can be canceled by pressing the Clear key while a Status Message is being transmitted.
0
"No Reply" appears on the display and transmission of a Status Message is terminated if no response is received from
0
the target transceiver. If transmission fails because of busy status, "Busy" appears on the display and transmission of a
Status Message is terminated.
DMR FUNC (K, F)/Ver 2.20
] key.
"Entering or Deleting a Code" for the entry
Menu ([ ]) key.
Status
Status
Status
Status
S el ec t
Z o n e 1
C h a n n e l
S e n d D a t a
M en u Zo ne+
Z o n e 1
C h a n n e l
C o m p l e t e
M en u Zo ne+
CONTENTS INDEX
A
12 : 34
M
B ac k
A
12 : 34
M
1
Del et e
A
12 : 34
M
A
12 : 34
M
42