Kenwood NX-5000 Series Function Reference page 134

3 COMMUNICATION SECURITY
Note
The following are the types of user data and whether the various user data can be encrypted or not:
User Data
Status Message
Short Message
W: encryptable, L: not encryptable
Upon transmission using the Encryption function by means of AES/ DES, the transmission cannot be done if no SCM is
0
installed in the transceiver, if the SCM is disabled, or if an Encryption Key corresponding to the Multi-key List Number
is not configured on the SCM. In this case, the Key Fail Alert Tone (6 beeps) sounds from the transceiver, and "Key Fail"
appears on the transceiver display for 1 sec.
Configuration using KPG-D1/ D1N
0 Enabling or disabling Encryption and configuring the Multi-key List Number for DMR Conventional (Personality)
( Transceiver Settings > Personal > Personality > DMR Conventional > DMR > Encryption Settings)
0 Enabling or disabling Encryption and configuring the Multi-key List Number for DMR Conventional (Channel Edit)
( Transceiver Settings > Zone/Channel > Channel Edit > DMR Conventional > DMR > Encryption Settings)
0
Configuring Encryption Type of DMR (
DMR FUNC (K, F)/Ver 2.20
Table 3-1 Encryptable User Data
Bit Scrambling
L
L
Transceiver Settings > Encryption > DMR)
AES/ DES
(KWD-AE30/
Built-in DES
KWD-AE31/
KWD-DE31)
L
W
CONTENTS
Enhanced
Encryption
L L
W W
INDEX
117