Kenwood NX-5000 Series Function Reference page 85

1 DMR CONVENTIONAL SYSTEM
1.15 Sending GPS Data
Selecting the Transmission Method of GPS Data (GPS Report Channel)
GPS Report Channel is the function to lock analog mode or DMR mode for the transmission method of GPS data regardless
of the mode used for voice communications when the transceiver automatically sends GPS data (including Polling) by using
the GPS Report on Data Zone-Channel or GPS Report on Data System-Personality function.
The transceiver behaves as follows according to the configuration in GPS Report Channel.
Configuration
If "Analog" is configured in Transmit Mode of the selected channel, GPS data is automatically
sent by Data Zone-Channel (Analog) or Data System-Personality (Analog).
Selected
If "DMR" is configured in Transmit Mode of the selected channel, GPS data is automatically sent
by Data Zone-Channel (DMR) or Data System-Personality (DMR).
GPS data is automatically sent by Data Zone-Channel (Analog) or Data System-Personality
Analog
(Analog) regardless of the configuration in Transmit Mode of the selected channel.
GPS data is automatically sent by Data Zone-Channel (DMR) or Data System-Personality
DMR
(DMR) regardless of the configuration in Transmit Mode of the selected channel.
Note
This function is not applicable to GPS data sent by pressing the Send the GPS Data key.
0
If anything other than "Selected" is configured in GPS Report Channel, GPS Report Back to Requested ID becomes
0
disabled.
In an LTR Trunking system, analog mode or DMR mode cannot be locked for the transmission method of GPS data. In
0
an LTR Trunking system, the transceiver always behaves by the configuration of "Selected".
Even if "Analog" or "DMR" is configured in GPS Report Channel, the transceiver behaves by the configuration of
0
"Selected" for the first transmission when the transceiver receives a Polling request and sends GPS data. If the transceiver
is to subsequently continue GPS data transmission, GPS Report Channel is enabled for automatic transmission, and
the transceiver behaves by the configuration of "Analog" or "DMR".
Configuration using KPG-D1/ D1N
0
Configuring GPS Report on Data Zone-Channel to be enabled or disabled (
Personal Features > DMR Conventional > GPS)
0
Configuring Data Zone-Channel (DMR) (
Conventional > DMR)
0
Configuring GPS Report on Data System-Personality (
> DMR Conventional > GPS)
0
Configuring Data System-Personality (DMR) (
Conventional > DMR)
0
Configuring GPS Report Channel (
> GPS)
DMR FUNC (K, F)/Ver 2.20
Table 1-18 GPS Report Channel
Description
Transceiver Settings > Personal > Personal Features > DMR
Transceiver Settings > Personal > Personal Features
Transceiver Settings > Personal > Personal Features > DMR
Transceiver Settings > Personal > Personal Features > DMR Conventional
Transceiver Settings > Personal >
CONTENTS INDEX
68