Kenwood NX-5000 Series Function Reference page 64

1 DMR CONVENTIONAL SYSTEM
1.10 Sending and Receiving a Status Message (Status Call)
Sending the Received Status Message from the Communication Port (Status
Message Serial Output)
Status Message Serial Output allows the transceiver to send the Status and the Unit ID of the transmitting transceiver
from its communication port when the transceiver receives a Status Message.
Using Status Message Serial Output, the dispatcher can monitor the received Status Message in real time.
Note
To use Status Message Serial Output, the "Data" or "Data + GPS Data Output" must be assigned to the communication
port of the transceiver.
Configuration using KPG-D1/ D1N
0
Configuring Status Message Serial Output to be enabled or disabled (
Information > General > Serial Output)
0
Assigning functions to COM port (
Interface > COM Port)
Power-on Status Message
Power-on Status Message allows the transceiver to send the selected Status Message when the transceiver is turned on.
Using the Power-on Status Message, the base station can recognize that the transceiver has been turned on. The
transceiver sends the message to the Base ID of the system to which the channel selected when the transceiver is turned
on belongs.
Note
If Transceiver Password is used at the same time, a Status Message is sent when the transceiver is turned on and the
transceiver migrates from Transceiver Password Mode to user mode.
Configuration using KPG-D1/ D1N
Configuring Power-on Status Message (
on/off Status Message)
Power-off Status Message
Power-off Status Message allows the transceiver to send the selected Status Message when the transceiver is turned off.
Using the Power-off Status Message, the base station can recognize that the transceiver has been turned off. The
transceiver sends the message to the Base ID of the system to which the channel selected when the transceiver is turned
off belongs.
Configuration using KPG-D1/ D1N
Configuring Power-off Status Message (
on/off Status Message)
DMR FUNC (K, F)/Ver 2.20
Transceiver Settings > Optional Features > Optional Features 1 > Serial
Transceiver Settings > DMR > DMR Information > Conventional > Power-
Transceiver Settings > DMR > DMR Information > Conventional > Power-
Transceiver Settings > DMR > DMR
CONTENTS INDEX
47