Initial Spindle State - Siemens SINUMERIK 840D Function Manual

S1: Spindles
18.2 Operating modes
Configuration: MD35035 $MA_SPIND_FUNCTION_MASK, bit 20 = 1
Program code
WHEN COND21==TRUE DO M3 S1000
WHEN COND22==TRUE DO POS[C]=270
18.2.7

Initial spindle state

Spindle basic setting
The following machine data is used to specify a spindle mode as basic setting:
MD35020 $MA_SPIND_DEFAULT_MODE
Value
0
1
2
3
Time when the spindle basic setting takes effect
The time when the spindle basic setting takes effect is set in the machine data:
MD35030 $MA_SPIND_DEFAULT_ACT_MASK
Value
0
1
2
762
Spindle basic setting
Speed control mode, position control deselected
Speed control mode, position control activated
Positioning mode
Axis mode
Effective time
POWER ON
POWER ON and program start
POWER ON and RESET (M2 / M30)
Comment
; Alarm 20141!
Function Manual, 06/2019, A5E47437747B AA
Axes and spindles