Curve Em System Setup - Brainlab CURVE System And Technical User Manual

Curve EM System Setup

2.2.2 Curve EM System Setup
General Information
Monitor Cart and EM Tracking Unit are delivered preinstalled and ready for use. All system
components are suitable for continuous use during surgical procedures.
Related Links
3.2.3 Positioning Monitors on page 36
3.3 Panels and System Ventilation on page 39
5.2.4 Connecting EM Instruments on page 87
7.1 Locking and Unlocking Brakes on page 105
7.2 Docking Camera and Monitor Carts on page 108
7.3.2 Proper Transport Procedure on page 119
7.4.3 Transporting the EM Tracking Unit using Transport Cases on page 123
How to Safely Position the System
Step
1.
2.
3.
4.
5.
6.
7.
8.
22
Remove protection cover from Monitor Cart before entering the OR.
Move equipment into the OR.
Position the Monitor Cart in the OR.
NOTE: Do not position the monitor or any other part of the Monitor Cart directly over the
patient.
Lock all brakes on Monitor Cart.
Unpack and set up EM Tracking Unit.
Move monitor into desired position.
Connect all cables at the connection panel of the Monitor Cart.
Connect EM instruments to the EM Base Station.
System and Technical User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2