Connecting Em Tracking Unit To Monitor Cart - Brainlab CURVE System And Technical User Manual

Connecting EM Tracking Unit to Monitor Cart

5.2.3 Connecting EM Tracking Unit to Monitor Cart
Turning the EM Tracking Unit On
When the EM Tracking Unit and Monitor Cart are connected, the EM Tracking Unit is powered
on as soon as the Monitor Cart is turned on.
Safety Notes
When disconnecting EM cable, do not twist the plug. Grasp the plug, rather than the cable,
and pull it straight out.
Warning
Always disconnect the EM power cable from the EM Tracking Unit before connecting or
disconnecting the EM data cable or the EM Field Generator cable.
How to Connect the EM Tracking Unit to the Monitor Cart
Step
1.
2.
3.
4.
84
②
①
Ensure that Monitor Cart is turned off.
Connect the data plug of the EM cable to the navigation system port of the EM Base Sta-
tion ②.
Connect the power plug of the EM cable to the power port of the EM Base Station ①.
To connect to Curve Monitor Cart:
System and Technical User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2
Figure 37