System Shutdown - Brainlab CURVE System And Technical User Manual

USING THE SYSTEM
6.2

System Shutdown

How to Reset
Step
To reset the computer (if system has frozen or has not completely shut down) press on/off button
① for five seconds.
Waiting Periods
When disconnecting the system from line voltage, wait at least 10 seconds before
reconnecting it.
Do not turn off system during boot-up. Otherwise, configuration files and other data on
hard disk may be damaged or lost.
Emergency
In case of emergency only, use mains power switch and unplug detachable mains power cable to
insulate the equipment from supply mains. The system is equipped with UPS, do not only
disconnect the detachable mains power cable but always also turn the mains power switch to the
off setting to disconnect all mains power.
Power Failure
Warning
Should a power failure occur, be aware that the UPS only keeps the system running for
maximum five minutes. Apply mains power or shut down the system to avoid irreversible
loss of data.
How to Shut Down
Step
1.
2.
3.
4.
Using the mains power switch before equipment has fully shut down may result in
irreversible loss of data.
Switch off mains power before connecting or disconnecting cables.
System and Technical User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2
Shut down system using the software.
When the standby LED turns off, shut off mains power switch ④.
When the mains power LED turns off, unplug and secure all cables, storage devices and
MP3 players.
Unplug the mains power cable from the Monitor Cart.
99