Using The System; Powering System On - Brainlab CURVE System And Technical User Manual

USING THE SYSTEM

6 USING THE SYSTEM
6.1

Powering System On

Power Components
The power components are located on the user panel.
No.
①
②
③
④
Power Supply
Warning
Operate system using the power source indicated on type plate. If you are unsure of type
of power available, consult Brainlab support or your local power company. Using the
wrong power source could seriously damage system.
Warning
Check voltage setting before plugging mains power cable into wall outlet.
Warning
Only establish or interrupt an electrical connection when all associated devices are fully
turned off.
Only operate the system using the mains power cable provided with the system.
If system has been turned off, wait at least 60 seconds before turning it on again.
Otherwise, high input current may trip the circuit breaker.
System and Technical User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2
① ②
Component
On/off button
Power LED
Mains power LED
Mains power switch
③
Figure 48
④
97