Transport And Parking Position - Brainlab CURVE System And Technical User Manual

Transport and Parking Position

7.2.2 Transport and Parking Position
Warning Label
The warning label illustrates the correct parking and transport position for Camera Cart when
docked to the Monitor Cart.
Ensure that the monitors are locked in place in the position indicated on the warning label.
Precautions
Only transport the Camera Cart in transport position. It is possible for the extended cantilever arm
to unexpectedly swing outward when movement stops.
Be careful when using the handle on the post to rotate the camera arm as the arm has a wide
radius, which could allow the camera to come in contact with equipment or people.
Warning
If Camera Cart is not in the proper transport position while moving, an abrupt stop may
cause the camera arm to oscillate.
How to Position Monitor Cart
Step
1.
110
Rotate the (lowest) arm in the direction indicated on the parking label until the label lines
up with the corresponding label on the Monitor Cart post.
NOTE: Be aware that there is a fixation that causes the upper arm to move when the an-
gle between both arms is 90°.
System and Technical User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2
Figure 57