Compliances; Electromagnetic Emissions - Brainlab CURVE System And Technical User Manual

COMPLIANCES AND SPECIFICATIONS
11.4

Compliances

11.4.1

Electromagnetic Emissions

Electromagnetic Environment
Curve systems are intended for use in the electromagnetic environment specified in the table
below.
The user is responsible ensuring that the systems are used in such an environment.
Declaration
Guidance and manufacturer's declaration regarding electromagnetic emissions:
Emissions Test
Conducted and radiated RF
emissions
Harmonic distortion
Voltage fluctuations flicker
The emissions characteristics of this equipment make it suitable for use in industrial areas and
hospitals (CISPR 11 class A). If it is used in a residential environment (for which CISPR 11 class B
is normally required) this equipment might not offer adequate protection to radiofrequency
communication services. The user might need to take mitigation measures, such as relocating or
re-orienting the equipment.
Warning
This system is intended for use by health care professionals only. It may cause radio
interference or disrupt the operation of nearby equipment. It may be necessary to mitigate
its effects by re-orienting or relocating the system or shielding the location.
Warning
The system should not be used adjacent to, or in direct contact with other equipment. If
this cannot be avoided, normal operation must be verified in the configuration in which it
will be used.
System and Technical User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2
Standard Compliance Level
Group 1
CISPR 11
Class A
IEC 61000-3-2 Class A
IEC 61000-3-3 Complies
171